Announcements

Review: Pass Laboratories XA100.8 mono block amplifiers

DSC_3148

Best of 2014“The Pass Laboratories 100.8 mono block amplifiers mark the advent of what may be the finest-sounding amps the company has produced to date, and a solution that is fully competitive with the very best on the market today.” — Scot Hull

“Solid state like this would have been unimaginable just a decade ago. The Pass XA100.8 is a new benchmark for versatility and performance. Everyone should have a chance to hear a pair. It’s almost enough to make me swear off tubes.” — Malachi Kenney

Passing Muster

The Editor Himself gave me a call in late August to ask whether I’d be interested in reviewing what he deceptively called “some Pass gear.” Since I’d just gushed about listening to the new Pass Laboratories XA60.8 at this year’s California Audio Show, I may have said, “yes,” before he finished the question. A couple of weeks later, on the hottest day the Oregon Coast has seen since I moved here, two boxes — each pushing 120 pounds — showed up. Inside each, and fresh off the assembly line, was one XA100.8 monoblock.

That’s when the Editor Himself called again. Would I be interested in comparing the .8 to some of the .5 series? And would a Pass preamplifier be interesting for color? I may have been slower to answer that question, but, like a chump, I said, “Sure.” A week later, a three-man crew from FedEx showed up with five more Cartons of Unusual Size, and a whole mess of hand trucks to wheel them up my driveway.

“Next time,” the driver said sternly, “call UPS!”

That’s when I called The Editor. “I literally don’t have the space in my house for these,” I moaned. “My garage is full of giant boxes,” I complained. “My back! My back!” I pleaded. The Editor himself called me a crybaby. I was directed, in no uncertain terms, to “suck it up.”

The “it” to be sucked, in this case, was a pair of XA60.5 monoblocks, a pair of XA100.5 monoblocks, and a wholly absurd XP-30, three chassis preamplifier. I mention this to you because you might one day get a phone call asking if you want to review “some gear.” If that happens, make sure you ask for a very clear definition of “some.” You want to be very certain that “some” isn’t too semantically close to “all.”

The Pass Labs XA100.8

The main subject of the review, though, is the Pass XA100.8 amplifier. Weighing in just over 100 pounds per channel, standing at just under ten inches tall, and extending just under two feet in length, it could be described as comfortably smaller than some of the Dreadnought Class amps Pass produces. It could also be described as a hulking behemoth that dwarfed any other electronic gear in my house and was outweighed only by my refrigerator.

Extensive heat sinking on both sides accounts for some of that weight. Pass has abandoned their Terminator-esque faceplates in favor of a more restrained (and adult) styling that shaves a few pounds off the front of the amp. Centered on the faceplate is, of course, the Big Meter and a push-button switch to take the amp out of standby mode. The rest of the amp is a nondescript, completely utilitarian steel that, other than its superbly close fit, gives the distinct impression that every reasonable expense has been spared. The money — and the weight — is inside the box. The only bling is that faceplate.

Moving around to the back, the other sign that these amps cost a cool $19,300 per pair is a pair of torque guard binding posts on either side. RCA and XLR (jumpered for single-ended operation by default) inputs top the back panel, with an IEC inlet and power switch down at the bottom. Rounding things out is a set of binding posts for the 12v trigger, and (since these amps have a differential output) what appears to be a post for a ground connection. You could consider that ground useful for your Tannoys‘ fifth binding post, or you could consider it an easy connection that lets the amp’s differential output stage connect easily to a subwoofer (like REL) that can’t take a balanced signal as an input.

The main binding posts deserve special attention. I’ve long been a fan of Speakon connectors for their no-muss-no-fuss user friendliness — those of us with ten thumbs need all the friendliness we can get — but the ones I’ve heard have had a tendency to affect the sound in not terribly attractive ways. The Cardas Patented Binding posts have been my go-to for a good, solid connection that rivals a simple screw terminal while still offering some ease of use, but their spade-only compatibility, and my habit of dropping pieces of the connector into some dark crevice when swapping cables, limits their attractiveness. Whoever supplied Pass with these five-way binding posts now has my undying loyalty. They’re chunky, they feel good, they’re well spaced, and they’re impossible to over tighten. Just twist them until they make a ratchet noise. Done. These things are so good that I didn’t even swear once when I used them. That is, for the record, a first.

Burn in takes on a new meaning

I mentioned that the amps arrived on the hottest day of the year. In case you ever get jealous of the audio reviewer gig, I want you to remember that. Air conditioning is an unheard of frippery in grey and rain-soaked Lincoln City. The Pass amps arrived during a freakishly hot period of sunny days in the nineties and warm nights in the high eighties.

People, these amps suck 450 watts each from the wall and heat up to about 130 degrees Fahrenheit. Temperatures in my house quickly passed 100 degrees and stayed there.

On top of the heat, I feel it necessary to mention the break-in smell. These amps were brand spanking new. That means the odor of new electronics cooking in the summer heat was … let’s call it “oppressive.”

In this case, though, this can be seen as a good thing. The amps required a significant amount of use before they finally came on song and the smell turns out to be a good indicator of how much of a flogging you’ve given. When it finally disappears, make a note. You’re 50% of the way toward being completely broken in.

You’ll want to make that note. Break in with these is a very big deal indeed. The sound when the amps were fresh out of their factory boxes was, barring a few complaints, magnificent. Two days later, that sound was discordant. During the six weeks it took to finally run in the amps, the sound careened around like a drunken toddler. There were days with no bass. There were other days with no treble. Those were both better than the days with no midrange. There were even days with bass, treble, and midrange — but each one of those was wrong.

Everything evened out at about week three, but there was a persistent (and annoying) sense of a double-tap on the treble. Higher frequencies seemed to have an echo. It was, in fact, the only constant throughout the break in period. I had even started drafting a review that referred to that as the fatal, tragic flaw of the amps while trying to describe why I loved them anyway.

And then, in week six, the double-tap went away. I didn’t even notice it at first, because I thought someone had broken my window.

I should explain something. My listening space, in violation of all good sense, has an eight foot wide window on the front wall. It does terrible things to the sound, but I consider that a good trade for the chance to watch deer walk by less than fifteen feet away. I should also mention my general antipathy to solid state. Most of the solid state I’ve heard — all of it, honestly — misses a little something. Heck, every amp misses something, but there’s a stereotypical solid state sound that misses depth.

The moment that the amps broke in, the soundstage jumped through that window.

The Sound

Half of Groovin’ with Jug may be the best album ever. The other half of it is genuine elevator pablum, but half the album is a treasure. Richard Holmes and Gene Ammons just couldn’t find the magic when they were in the studio (the pablum). They could, however, drag the microphones back to a club and hammer it out on stage (Holy Fried Awesome!). The live takes on the album are, in a decent system, only about seventeen ashtrays away from being as close to there as you’re likely to get.

Before the 100.8s broke in, that meant a soundstage that extended out well past the side walls and from the front wall up to the couch. When they broke in, while I was sitting at my kitchen table, it meant that the phone was ringing in my garage, glasses were clinking at my kitchen sink, and Jug was blowing about four feet up on the hillock outside my big front window.

Was it as purely holographic as the very best tube soundstaging? No. Was it realistic soundstaging? It was sure as heck closer to it than my Manley Snappers. Did it have that thermionic breath-of-life tone? I didn’t think so, but I honestly couldn’t tell at first. More music was called for, but my wife, damn her, was stern. She got the sweet spot when she was at home, and I could fend for myself.

“You write the review, then!”

“No,” she explained.

So we descended into Americana for a while. Patty Griffin’s “Moses” is almost the Ur girl-with-guitar track. The Pass XA100.8 put the guitar in the room. Most decent amps do well with the tone, but fall short of making the illusion’s dynamics believable. These monsters from Pass more than managed to cross the line into total illusion. There was no sense at all that dynamics were being truncated, though I will admit that I wished that Patty had chosen to belt that number out in someone else’s house.

First Aid Kit’s “Emmylou” showed the sisters’ impeccable harmonies as flawlessly and properly layered, but they really surprised by showcasing producer Mike Mogis’s slide guitar work. Another run at the Mekons’ apocalyptic “Burning in the Desert Burning” had the Pass amps not only pulling apart the band’s campfire chorus, but highlighting the minimal vocal reverb that turns John Langford into the voice of happy doom.

I left the room when Kirsten cued up Rufus Wainwright, but she told me that it was “really good.” I consider that to be a strike against the amps. Let me know when someone with taste makes an amp that refuses to play that stuff, will you?

Fortunately for me, Kirsten left the house occasionally. That’s when Ministry showed up (accompanied by Portishead, Shilpa Ray & Her Happy Hookers, the Clash, the Minutemen, and Crazy Horse). It didn’t take long to be sure that the XA100.8 knew know how to rock like a seventeen year old with a stolen bottle of Jack Daniels. For reference: playing the version of “Cortez the Killer” hiding out as “alternate take” on the hi-rez version of Psychedelic Pill makes the best argument for big amps and big speakers that I’ve ever heard. If you’re going to yank the volume knob all the way to the right for one track this year, make it that one. If you can make it through without cheering, something has gone very wrong with your life.

The XA100.8s are clearly heavyweights, but there’s always a question about whether a prize-fighter can also be delicate. There’s no worry here. These are as delicate or as energizing as you need them to be. Whether its refined contemplation of Gidon Kremer and the Astor Quartet on their Tango Ballet, or the exuberance of Barbara Hendricks hollering out “When the Saints Go Marching In” on Chants Sacrés, the Pass amps were chameleons. I never found any music that wasn’t served superbly. As someone who enjoys complaining a great deal, I feel a bit cheated.

Were there shortcomings? Yes. Maybe. The treble was just a notch or two less pure than the very best I’ve heard, the depiction of space wasn’t up there with some exotic single ended triodes, although I can’t think of anything else that bettered it. And there was that lingering problem of the heat and power consumption of running two rather large Class A monoblocks.

Warmup is, unsurprisingly, another issue. You’ll want to make use of that standby switch. The amps only take an hour or so to really hit their stride when they come out of standby. Turning them off, though, is an entirely different story. You’ll be looking at more than a day before they’re singing again after being powered down for any length of time. That’s not a shortcoming, really, but I’m reaching here. There’s not a whole lot to complain about.

System matching wasn’t a weakness at all, though. Everything from a Mark Audio 10.2 single driver, some Altec 604-8g, Tannoy Glenairs, old Martin Logans, or the under-the-radar, over-achieving, Endeavor Audio E3 gave the best, most even, most well-rounded presentation I’ve heard from any of them. As far as I can tell, the XA100.8 is an easy match for speakers. Preamps and sources provided any desired character, with my Frankensteined K&K preamp providing the most tonal density and the three-chassis Pass XP-30 providing freakish transparency. Single ended inputs worked just about as well as the balanced inputs, with only a slight diminution of the outer envelope of dynamics and a slight rise in the noise floor (unobjectionable even sitting in the nearfield of of 100db Altecs) as the tradeoffs. In every way other than physical size, these amps are exceptionally easy to fit into a system.

Trying to get a handle on what the XA100.8 actually sounds like is the kind of problem that highlights just how very good these amps are. When I had the amp paired with the Tannoy Glenairs, I would have told you that the amps’ signature was “big, bold, and authoritative”. They were bruisers with a propulsive kick that communicated every musical line, never sacrificing musicality for Hi Fi stunts. Hooked up to the Endeavor E3, though, the 100.8 was a critic’s favorite tool, digging detail out of the mix like a paleontologist brushing dirt away from a fossil. Musical, yes, but almost incomparably incisive and insightful. The old electrostats, on the other hand, showed the amps as speed demons. Quick transients and micro-detail were their specialty. Every listening session became a deeply intimate affair.

EditorsChoiceSmallWhat every presentation had in common, though, was impeccable evenness and timing. The musical flow was never disrupted by any oddity. There were no missteps, there were no weak beats, and there were no favorite bits to be found. Where some amps will highlight the vocal range, and other amps will impress with their sense of air, the XA100.8 will simply serve up whatever delights are on the menu so the listener can decide what is important this time. They are stunningly natural amps that deliver the music in a stunningly natural way. Listening to them isn’t so likely to make you reach for every album in your collection as it is to make you listen to whatever it was that you just heard again and again and again.

If you have the cash and the cooling, the Pass XA100.8 monoblocks are no brainers. They’re so versatile and rewarding that it would be hard to praise them enough. They’re not cheap at $19,300 per pair, but they are superb and uncompromising references.

These will be end-game amps for all but a very few.

DSC_3151

Play Time

The Editor had been giving the eye to the XA100.5 ($16,500 per pair) and the XA60.5 ($11,000 per pair) as well as that XP-30 preamp ($16,500 per pair). They came to my door with the hope that I could shed some light on the differences between the amps while talking about any system synergy. I honestly wasn’t expecting much in the way of differences when they showed up. I was unbelievably wrong.

Let’s start with the preamplifier first. It’s magnificently built, startlingly intuitive, sports an honest-to-goodness mono switch, and comes with a milled remote that’s solid enough to use as a mêlée weapon. It features what has to be one of the most transparent volume controls that I’ve ever used. It’s even-handed, with only a bit of solid-state sheen at the top end and a surprising bit of leanness in the mid-bass and lower mids. The master volume knob is large enough to find in the dark — in a parking garage. When you’re lost. On the moon — and comfortable enough that you’ll probably want to use it instead of the remote just to giggle when you do. Each signal channel has an independent gain control, so balance adjustments are possible, too. I can’t think of any feature that wasn’t provided for.

There’s nothing bad to say about it, but rambling on about “competent and transparent” doesn’t make for good reading in a review. It’s superlatively competent and transparent, of course. It does, after all, cost as much as a new car. Nobody lucky enough to afford one will feel shortchanged.

The curiosity of the bunch is the highly praised XA60.5. The amp has earned its reputation. The treble is, bar none, the sweetest and cleanest that I’ve heard. Soundstaging is beyond reproach, offering a nearly Platonic sense of space and a fully realized view into it. There’s none of that “Oh, it’s good for solid-state” faint praise to be found here. Imaging was wholly holographic and completely captivating. Tone was everything you could hope for, uncolored and unromantic, but properly dense and with full bloom. The amp’s speed was something I never expected, though. It had the magical property of turning my big, slow Tannoys into lightning fast Lowthers — but with great treble! It was a Christmas miracle!

Unfortunately, the XA60.5 also turned my big, slow Tannoys into lightning fast Lowthers in a less endearing way. It’s just weak below 500hz. By the time you get to the sub-100hz region, it’s only going to offer a faint representation of bass. This trait held firm on every speaker I used, changing all of my big boxes and big panels into surprisingly dynamic shoebox monitors. Kick drums had kick, but no body. Nick Cave sounded a bit like a choir boy. The Anonymous 4 sounded wonderful, but I got the impression that the Tallis Scholars were an all-girl band. My lousy pressing of Black Market Clash never had any bass to begin with, so it sounded better than I’d ever heard it.

The listening experience was, in other words, A Little Weird. I was listening to what was, in essence, my favorite amp ever, but I couldn’t see this bringing the best out of my systems. The 100.8 couldn’t quite match the treble performance of the 60.5, but it was very close in the running, and it was a much better all-rounder.

The XA100.5, as the previous incarnation of the 100.8, promised better things. It mostly delivered — turning my Tannoy Glenairs into bass monsters. In fact, it delivered just about the best bass performance I’ve heard in my room. If it was slightly plummy — and it was — it was euphonically so. If it was slightly less dynamic than the 100.8 — and it was — it didn’t seem like much of a shortcoming. The bass was wholly addictive, ridding me of any desire for subwoofers. Pairing it up with the ever-so-slightly-lean XP-30 preamp quickly eliminated the extra fat (SYNERGY!), leaving me with a system that could do full justice to the Telarc 1812 when I wasn’t too busy cueing up every Mingus album in the house. Listening to Duke Ellington’s Afro-Bossa through this system remains one of the high points of my time in this hobby.

But you know what’s coming, right?

The treble … It wasn’t great. It was very solid-state sounding, with sheen and glare aplenty compared to the other two Pass models in the house. On top of that, everything between 1500hz and 10khz seemed touched by euphony, making completely crap albums (Black Market Clash, again) sound wonderful. It effectively homogenized the system with its own stamp, reducing the differences between cables, preamps, sources, and even my moods. That’s before we even talk about the soundstaging, which was so stereotypically solid state in character that I felt like I was suffering physical withdrawal after listening to the XA60.5.

Which got me thinking. The 60.5 and the 100.5 have just about the same gain. What would happen if I biamped the Tannoys with the 60.5 on top? What would happen if I used the XP-30 to match gain and ran the 100.5 on the bottom?

What happens is something very close to an expense paid visit to Paradise. With only minor differences in voicing, the whole system gelled. Treble that slightly bettered the 100.8 was matched to bass that dug slightly deeper than the 100.8. The slight difference in voicing between the amps was eventually an annoyance and distraction in this quick-and-dirty setup, but, during the four hours or so it took to notice that, I was treated to what was some of the best sound that I’d ever wrung out of any Tannoys. It quickly became clear, though, that the 100.8 alone provided a much more cohesive presentation. It was less colored than the 100.5, having a more realistically live sound in the lower frequency ranges while coming within spitting distance of the 60.5’s unimaginably good high-end performance.

In other words, the $19,300 pair of XA100.8 were, in my room, far preferable to $44,000 worth of Pass’s previous generation of gear powering the system. I stopped thinking that Pass had raised the price of their 100 watt amp and started realizing that they’d managed to lower the cost of absolute performance.

Which is really kind of neat when you think about it.

DSC_3127

DSC_3137

DSC_3153

DSC_3158

DSC_3164

The latest from Part-Time Audiophile

22 Comments on Review: Pass Laboratories XA100.8 mono block amplifiers

  1. Charlie Mathews // January 13, 2015 at 6:31 PM //

    Great marketing from pass…all the new .8 amps are talked about on different z mags at about the same time. Hey good job who ever is driving the matketing campaign for Pass . BTW I liked and use to own the 30.5 3 months ago.

    Now the real question is are the .8’s better than the .5’s or is this 2015 marketing ?

    • Scot Hull // January 14, 2015 at 1:36 PM //

      You can read and trust, or try and experience. If the latter option is available, and you’re in the market, then that’s how I’d explore it.

  2. Sorry I mentioned the burn-in thing in the first place! If I’m being entirely honest, in my heart of hearts, I am sceptical of the whole thing. If I had to bet real money it would be that these, and all other amplifiers, do not change their sound audibly or measurably over time. But I can see how the burn-in myth is so seductive. As someone mentioned earlier, the temptation is to think of a great big expensive thing like this as having the characteristics of a thoroughbred living, breathing, or mechanical system, like an exotic car. Once the idea is implanted in the audiophile’s head, they *will* experience the burn-in process, ‘real’ or not. Psychologically it’s brilliant for the manufacturer as the audiophile *persuades themself* that they have invested, bought-in, contributed to the eventual perfection of the device. In the case of a device with a characteristic sound, like a typical speaker, the audiophile is probably ‘burning in’ their own ears and brain to it, as much as the other way round.

    (Just my personal view, and I could be wrong. Like I said, I am a sceptic..!)

    • I think there is some truth to what you are saying regarding the break-in process being a psychosomatic phenomenon of the brain adjusting to the new components. No doubt this is influenced by the fact that the extra money spent must surely justify the better sound that we think we hear.

      For me no amount of break-in will make a bad sounding component ultimately sound good. It’s a very frustrating exercise.

      However, in my experience good-sounding gear may continue to improve with age, but most of the good sound qualities are already there as soon as I plug them in.

  3. Thanks for the review, Scott.

    I got a chance to demo a pair of XA100.8s in my system driving Magnepan 20.7s, but I could not get these amps to integrate into my system and decided to send them back.

    Somehow the units I received sounded rolled off in the mids and highs with my gear and I could not enjoy them at all. Maybe I was going through the break-in process you describe, but I did not have the time or patience for things to settle down (what if they never reached the “promised land” and then I would be stuck with bad-sounding amps?).

    I went back to my very fine XA100.5s and could not be happier.

    • It’s not my place to judge, but I think you made the right decision. You have to make choices based on your own experience, not faint promises of paradise from the internet.

      I can tell you that the recessed mids and highs were definitely a part of the break in process for me. That said, I suspect that the plummier bottom end of the XA100.5 would be a fine match to the Maggies. If the rest of your system is tuned to that combination, you might even find the broken in XA100.8 a teeny bit boring in the low mids. Heck, now that I’m thinking about it, the treble that I didn’t love in my system might really work in yours.

      Besides, I think that almost any excuse to *not* spend money is a good excuse. System matching is a whole lot more important than what some jackhole on the internet thinks — even when I’m the jackhole.

      You used your ears. You did the right thing.

      • Thanks for your reply, Mal.

        In my experience “breaking-in” audio gear, if I don’t like the sound of a new component right away the break-in process will not change that impression. The components I keep are the ones that I like initially and then improve even more with age. Unfortunately the XA100.8s did not fit that profile so I decided to send it back before the demo period was over. It was also hard to listen to my system during the break-in period because I kept trying new recordings and other tweaks to “fix” the sound so the demo became an exercise in frustration rather than an upgrade to my system’s performance.

        Like you say, I’m ok with that because I scratched the the upgrade itch and avoided spending thousands to move up the ladder.

        For reference here is my system before the XA100.8 upgrade:

        Esoteric K-03 (as DAC or player) -> WW Silver Eclipse 7 XLR -> Bent Audio AVC-1 Passive Line Stage (Autoformer Volume Control) -> WW Silver Eclipse 7 XLR -> Pass Labs XA100.5 monoblocks -> WW Eclipse 7 -> Magnepan 20.7s

        I also use Shunyata Research power distributors and cables.

  4. For me the bottom line is the amps are not broken in when they are sold. For the price that is atrociously lazy on behalf of the manufacturer. I can buy a $200 power cord or set of cheap speaker cables and pay a few bucks for a burn-in. There is no reason why the amp can’t be seasoned by the manufacturer. Pass Laboratories are selling an incomplete product at a premium price. If they expect the buyer to do the final break-in to get it to optimal performance there should be at least $1000 price reduction.

    • “I can buy a $200 power cord or set of cheap speaker cables and pay a few bucks for a burn-in.” Really? With whom? Personally, I can’t name 10 manufacturers that will do this. Much less, do it for free.

      The fact of the matter is that this is not common. Most — as in, statistically all — manufacturers don’t/won’t/can’t bother. Bits are assembled, tested for function, and sent. The point Mal was trying to make, which you may have missed, is that “what you get out of the box” is not what you’ll end up with. Said another way, if you like what you hear on Day 1, you’re gonna love what you hear on Day 50.

      Setting a price tag on “burn in” is also a bit arbitrary, isn’t it? I’m assuming that the price of the amps is market-driven, and that they’re set at a non-random point. Break-in would be a value-added service, that is, would cost more.

      • Take Five Audio in Canada offers burn in on their power cables for $5.00. Futureshop UK offers 24, 48, 72, 96 hour burn in on their QED speaker cables for free.

      • … and that’s two. And they’re cable makers. I’ll add that ModWright offers to do run-in. So, that’s three. But like I said, that’s out of a potential of how many manufacturers?

        The point is that it’s just not common. And arguably not necessary. It’s not like the products don’t work, or that they don’t sound great, or that they don’t eventually sound awesome. All products get a little better with use.

        Your brand-new car has some pretty serious recommendations for how it ought to be used for that first 1,000 miles. You’re free to ignore them, but if you want to get the most out of the next 10,000 miles, that first 1,000 ought to be treated differently — you could say that the car is “breaking in” during this period. Not weird that an amp has a similar character.

        And none of this is to say that you will see this kind of behavior. Mal’s systems is rather particularly tilted toward the scalpel-like — very sensitive and very revealing. I fully expect that your mileage will vary.

      • Tying a cable into a cable cooker for a day or two presents a different set of logistical challenges than finding the space, cooling, power, and signal to run in a line of large amplifiers for a few hundred hours.

        Frankly, I don’t consider that kind of break in to be a necessary service for a manufacturer to provide. The amps were superb out of the box, and they went through some changes that made them briefly unpleasant on their way to becoming some of the finest amps I’ve had the pleasure to hear. If someone isn’t going to have the patience for breaking them in, their options are to ignore all the gear that shares this trait (quite a lot of the market) or to work out an arrangement with their dealer.

        Let me add this: Seizing on a description of the break in process as though it were an indictment strikes me as somewhat odd. I can only imagine that the folks at Pass Labs must find it comforting. If I were a manufacturer, I know that I’d be ecstatic if the worst complaint leveled at my products was “they get better the more you use them.” That’s not a complaint. That’s an ad campaign.

      • “Break in with these is a very big deal indeed. The sound when the amps were fresh out of their factory boxes was, barring a few complaints, magnificent. Two days later, that sound was discordant. During the six weeks it took to finally run in the amps, the sound careened around like a drunken toddler. There were days with no bass. There were other days with no treble. Those were both better than the days with no midrange. There were even days with bass, treble, and midrange — but each one of those was wrong.”

        It would seem to me that you seized upon the burn-in process with a fair amount of hyperbole. Discordant; careening like a drunken toddler; bass, treble, mid-range either missing or wrong. If I were a manufacturer I think I might be embarrassed that my product took six whole weeks to reach audio Nirvana. Was that actually 1008 hours? I truly admire your patience, and I do not doubt that once broken in this is an exquisite amplifier. But I suspect many people, experiencing what you did, would have shipped them back as possibly defective or not compatible with their systems. I doubt this is a massive production line with hundreds rolling off the conveyor belt every day. With a little effort and planning I’m sure they could come up with a way of burning in the product so it sounds good out of the box and stays that way.

      • Hyperbole aside, I think you’re reading for the negative. “There were days” does not say, mean or entail that [some days] = [all days]. Not really sure why you’d assume they were equivalent ….

      • Gavin Hadley // December 31, 2014 at 11:52 AM //

        So a guy buys a PC and requests that the mfr does a “burn in”. He receives the cable with a note from said mfr saying “burn in completed”. The guy is tickled pink and praises the heavenly sonics to all within earshot. Mfr laughs as he deposits the burn in fee in his bank acct thinking what a deal. He thinks “ya know some day I’m gonna have buy one of them cable cookers”. Moral being how do you even know if your cable was cooked? I agree with a previous poster regarding whats actually breaking in. I think it’s our ears or self delusion. Either way it adds to the mystique of this crazy hobby 🙂

      • I’m pretty sure some measurements have been done on this, showing the net effects of pre vs post “burn in” with conclusive data showing that there is in fact a performance change.

        I’m also pretty sure that not all components need or benefit from it or benefit from it equally. My memory is tickled by an anecdote relating to teflon-based caps being notorious for their operating character actually changing over the course of use — and taking a counter-intuitively long time for this to “complete”.

        But I’m not sure I’m able to offer more than stories or anecdotes. I don’t doubt Mal and I know his system is tilted toward the resolving end. He’s also a persnickety and particular bastard, so any deviations from his beloved baseline is sure to annoy him in pretty egregious ways. That said, this break-in was only a small part of his experience and did not detract from his final judgment.

        Gotta say, having to get familiar with three different sets of mono block amps was not a simple, easy or straightforward chore. The fact that they all proved markedly different actually lines up with the designer’s notes in ways that I’m still not sure I’m going to share with him. Ha!

      • It’s true. I get annoyed easily. On the plus side, though, I really enjoy complaining.

  5. “The fact that you haven’t dealt with break in effects says more about the limitations of your listening experiences than it does about the amps. These things are utterly superb.”

    Yes, I’m sure that’s it. (But you’d think they might break them in for you, rather than risk releasing them to reviewers sounding less than their best..?)

  6. Gavin Hadley // December 26, 2014 at 4:56 PM //

    Gotta admit that after spending 16 grand on this guys not sure I’d have the patience to put up with this nonsense. I know many here will poo poo my choice of McIntosh monoblocks but these things sounded great out of the gate with oodles more power and oodles less $$. That’s not to say I wouldn’t love to own a pr of Pass amps!

    • Putting up with it was a pure pleasure. The amps almost never sounded terrible. In this case, because of the high price, I also have to say that I’m glad to have had an open enough schedule to make writing about the break in possible. It’s going to be an important factor in any audition, and I think that any prospective customer should ask how many hours the amps have on them before they make any decisions. It’s not, however, a reasonable worry for ownership unless you’re the kind of buyer who trades out twenty grand amplifers every month and a half.

      As for Mac, it should go without saying that I can’t comment on their break in times without having broken a comparable pair of amps in myself. If the good folks in Binghamton feel like sending me a pair of ginormous monoblocks for a review, I would be more than happy to talk about any breaking in they do.

  7. ” Two days later, that sound was discordant. During the six weeks it took to finally run in the amps, the sound careened around like a drunken toddler. There were days with no bass. There were other days with no treble. Those were both better than the days with no midrange. There were even days with bass, treble, and midrange — but each one of those was wrong.”

    Sounds incredible. Any theories as to why that might be?

    No any amplifier I’ve owned ever did anything like that, but of course they weren’t as good as this one. I don’t remember our TV displaying strange colours when it was new, or the microwave oven producing strange tastes in the food. One day I hope to be able to afford ones that do, of course.

    • I have no real theories, but it’s not actually all that uncommon. Most of the amps and components I’ve used have had seen some very serious changes over the course of the first few hundred hours. The XA100.8 didn’t seem at all out of line. Given the sheer number of output devices and support networks that need to be broken in to have it sing, it’s really not surprising that there were changes. Given the size and complexity of this amp, it’s more surprising that it works so absolutely perfectly every SINGLE time once you’ve broken it in.

      In case it’s not clear: I was listening to these things for ten hours or more per day. Those effects should be considered *flavor*. If the amp had sounded *broken*, I would have sent it back to the factory.

      The fact that you haven’t dealt with break in effects says more about the limitations of your listening experiences than it does about the amps. These things are utterly superb.

4 Trackbacks / Pingbacks

  1. Pass XA100.8 Review
  2. Pass Labs XA-100.8 Review - AudioAficionado.org
  3. CES 2015: Pass Labs and a suite full of new gear | The Audio Traveler
  4. Review: Zesto Audio Bia 120 | Confessions of a Part-Time Audiophile

Comments are closed.